How to calculate the formula for wardrobe boards
When customizing a wardrobe, accurately calculating the amount of panels is key to controlling costs and avoiding waste. This article will introduce the calculation formula of wardrobe boards in detail, and combine it with structured data to help you quickly master the core method.
1. Basic principles of wardrobe plate calculation
The amount of wardrobe boards used mainly depends on the size, structure and design style of the wardrobe. The following are the key factors that influence the amount of board used:
| Influencing factors | Description |
|---|---|
| wardrobe height | Usually 2.4m-2.8m, the standard size of the plate needs to be considered (such as 1.22m×2.44m) |
| Wardrobe depth | Normal depth is 55-60cm, special requirements need to be calculated separately |
| Number of partitions | Each additional layer of partitions requires two additional side panels. |
| Door panel type | Calculations are different for swing, sliding or folding doors |
2. Specific calculation formulas and examples
The following is the commonly used plate calculation formula:
| Project | formula | Example (2.4m high × 1.8m wide wardrobe) |
|---|---|---|
| Side panel dosage | Height×Depth×2 | 2.4m×0.6m×2=2.88㎡ |
| Dosage of top and bottom plates | Width×Depth×2 | 1.8m×0.6m×2=2.16㎡ |
| Partition dosage | (Width - Side panel thickness) × Depth × Number of layers | (1.8m-0.018m)×0.6m×3=3.2㎡ |
| Door panel usage | Height × width (hinged door required ÷ number of door leaves) | 2.4m×1.8m=4.32㎡ (two doors, each door is 2.16㎡) |
3. Reference of loss rates of different boards
You need to reserve 5%-15% of the loss space when purchasing:
| Board type | Standard size | Recommended loss rate |
|---|---|---|
| particle board | 1.22m×2.44m | 8%-12% |
| Multilayer solid wood board | 1.22m×2.44m | 10%-15% |
| OSB | 1.22m×2.44m | 5%-8% |
| Eco board | 1.22m×2.44m | 6%-10% |
4. Recommended calculation tools
1.Manual calculation:Suitable for simple structure wardrobes, calculated item by item according to the above formula and summarized
2.CAD software:Bill of materials can be automatically generated through 3D modeling
3.Online calculator:Enter the size parameters to automatically generate the sheet quantity
5. Frequently Asked Questions
Q: How to calculate the corner wardrobe?
A: It is necessary to disassemble the corner part into two independent cabinets for calculation, and then subtract the area of the overlapping part.
Q: Does the thickness of the plate affect the calculation?
A: The thickness of conventional 18mm thick plates can be ignored when calculating the area, but it needs to be considered when calculating the cutting layout.
Q: How to optimize plate utilization?
A: Using the "dislocation method" to reasonably arrange components of different sizes on the standard board can reduce waste.
Through the above calculation formula and data analysis, you can accurately estimate the amount of wardrobe panels based on actual needs. It is recommended to conduct a second review and confirmation with the designer before officially placing an order to ensure the accuracy of the calculation results.
check the details
check the details
en
